Cet article explique comment préparer les outillages de sertissage pour améliorer la fiabilité des embouts d’isolateurs composites.
Source facts used
- CTCPM-140AS includes an integrated Acoustic Emission System as a standard feature since 2024.
- The acoustic emission system is used for real-time micro-crack detection during each crimp.
- Live display data can include pressure in MPa, acoustic intensity in dB and displacement in mm.
- The machine is positioned for composite insulator end fitting crimping and production-line quality control.
- Recorded crimping data supports traceability, troubleshooting and batch review.
Selection guidance
Les dessins d’embouts, le diamètre de tige FRP, la plage de produits et les adaptateurs doivent être définis avant la commande.
Acceptance and quality checks
Pression, déplacement, émission acoustique et traçabilité de lot doivent être reliés aux essais de validation.
Buyer checklist
- End fitting drawing and FRP rod diameter
- Voltage class and product family range
- Fixture locating method and adapter sets
- Pressure range and displacement record
- Acoustic emission alarm logic
- Batch traceability and report export
- Pull-out or routine test connection
FAQ
Should the buyer send drawings first?
Yes. Drawings and standards prevent fixture, capacity and layout mismatches.
Can one system cover several product families?
Often yes, but voltage, load, fixture, chamber and report requirements must be checked together.